[Back to Sensor]

PRESSURE SENSORS                       Ask for Quotation

TK Pressure Transmitter

TSA Pressure Transmitter

TPSA Pressure Transmitter

TPH Transducer for high pressure

TPF Pressure Transducer with flush measurement diaphragm

TPHA Transducer for High Pressure

XSA Pressure transmitters for applications in hazardous areas

TPS Pressure transducers

TDP Plug-in display for transmitters

TKDA Digital auto zero and span options

TPSADA pressure transducer with digital autozero and span option

XPSA Pressure transmitters for applications in hazardous areas

TPFADA pressure transducer with digital autozero and span option

Back to pressure sensors index...

 

TK Pressure Transmitter
• Ranges from: 0...3 to 0...500 bar and ranges from -1...+1 to -1...+10 bar (0...50 psi to 0...7500 psi and -15...+15 psi to -15...+100 psi)
• Output signal 4...20mA 2-wires / 0,1...5,1Vdc / 0,1...10,1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc / 1...10Vdc
• Protection rating: IP65 / IP67
• Wetted parts: AISI 430F and 17-4 PH
• Available with a variety of process connections, both standard and custom
• Accessories: TDP
  Ask for more Information

Profile

TK transmitters are based on the thick film extensimetric.
Thanks to highly stable electronic components, these transmitters can be used in applications requiring long-distance signal transmission or in smart control systems.
TK pressure transmitters are designed mainly measuring pressure in oil, air, and hydraulic circuits.
They can also be used in the technical and process measurement fields.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation

Back to pressure sensors index...

 

TSA Pressure Transmitter
• Ranges: from 0...0.05 bar to 0...60 bar (0...1 to 0...1000 psi)
• Complete range of voltage/current outputs
• Protection rating: IP65/IP67
• Wetted parts: AISI304 , AISI316, NBR, Viton
• Operating temperature range -20...+85°C
• Accuracy: ± 0.15% FSO typical
• Fill Fluid: silicone oil
• Available absolute ranges
• Available “Barometric” range (0.8-1.2 bar abs)
• Available low ranges (50mbar and 100mbar)
• Accessories: TDP
  Ask for more Information

Profile

Series TSA transmitters are based on silicon piezoresistive sensing element in wheatstone bridge configuration.
Thanks to highly stable electronic components, these transmitters can be used in applications requiring long-distance signal transmission or in smart control systems.
TSA pressure transmitters were developed mainly for pressure measurement in industrial refrigeration and air conditioning, compressor and pumps.
They are also used for monitoring and control on automatic machines and general purpose industrial applications.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation

Back to pressure sensors index...

 

TPSA Pressure Transmitter
• Ranges from: 0...50 bar to 0...1000 bar (from 0...750 to 0...15000 psi)
• Accuracy: ±0.1% FSO typical
• Complete range of voltage/current outputs
• Stainless steel construction
• Protection rating: IP65 / IP67
• Wetted parts: 17-4 PH
• Operating temperature range: -40...+105°C
• Accessories: TDP
  Ask for more Information

Profile

Series TPSA transmitters are based on the extensimetric measurement principle.
An innovative mechanical structure makes the transducer completely insensitive to tightening.
This transducer is suitable for all applications where along with robustness an elevated accuracy is required.


Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation

Back to pressure sensors index...

 

TPH Transducer for high pressure
• Ranges from:
0...1000 to 0...5000 bar / 0...15000 to 0...70000 psi
• Accuracy: 0.3% FSO
• Stainless steel construction
• Internally generated calibration signal
• “Autoclave” pressure fitting
• Protection rating: IP65
  Ask for more Information

Profile

Series TPH transducers are designed for applications in high-pressure hydraulic circuits.
It uses the extensimetric measurement principle with photo-engraved metal leaf.
The 4 active elements configuration allows a signal of 2mV/V, maintaining conditions of stress with high coefficient of safety on the measurement diaphragm.
Careful selection and ultrasonic checking of materials used in machining guarantee the absence of inclusions and defects on the primary reaction mechanics, assuring a highly reliable product.
The autoclave process connection in the English version makes series TPH transducers suitable for applications in the most common high-pressure installations.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation

Back to pressure sensors index...

 

TPF Pressure Transducer with flush measurement diaphragm
• Ranges: from: 0...10 to 0...1000 bar
(0...150 to 0...15000 psi)
• Accuracy: ±0.2% FSO typical
• Protection rating: IP65/IP67
• Wetted parts: 17-4PH
• Temperature range: -40...+120°C
• Flush fitting stainless steel measuring diaphragm
• Internal calibration signal
  Ask for more Information

Profile

TPF Series flush diaphragm pressure transducers are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 PH stainless steel, TPF is particularly suitable for pressure measurement where the media is with high viscosity (thick fluids, oils, rubber, pulps, chemical products, etc.) and the traditional transducers with internal measuring chamber cannot be used. The high thickness of the diapragm makes the product very reliable and suitable for heavy industrial application.
Internal state of the art electronics and very high precision mechanical machining make TPF product the ideal solution for above needs, where the non amplified mV/V sensor has to be used

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation

Back to pressure sensors index...

 

TPHA Transducer for High Pressure
• Ranges from:
0...1000 to 0...5000 bar / 0...15000 to 0...70000 psi
• Accuracy: 0.3% FSO
• Stainless steel construction
• Internally generated calibration signal
• “Autoclave” pressure fitting
• Protection rating: IP65
• Accessories: TDP
  Ask for more Information

Profile

Series TPHA transmitters are designed for applications in high-pressure hydraulic circuits.
It uses the extensimetric measurement principle with photoengraved metal leaf.
The 4 active elements configuration allows significant signals, with conditions of stress with high coefficient of safety on the measurement diaphragm.
Careful selection and ultrasonic checking of materials used guarantee the absence of inclusions and defects on the primary reaction mechanics, assuring a highly reliable product.
The resonance frequency of the measurement diaphragm varies from 18 to 80KHz based on the Full Scale.
The selection of highly stable electronic components and the availability of output signals in voltage and current make series TPHA transmitters suitable for applications in which the signal has to be transmitted over long distances or in smart control and checking systems.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation

Back to pressure sensors index...

 

XSA Pressure transmitters for applications in hazardous areas
• Ranges from: 0...0.25 bar to 0...60 bar (0...5 to 0...1000 psi)
• Accuracy: 0.2% FSO
• Current output signal
• Protection rating: IP65 / IP67
• Wetted parts: AISI 304 and AISI 316
• ATEX EEx ia IIC T5 e T6 Certification
• Accessories: TDP
  Ask for more Information

Profile

The XSA transducers are based on the piezoresistive measurement principle.
The mechanical structure makes the transducer insensitive during the tightening phase.
This transducer is suitable for all those applications which require robustness as well as a high accuracy.
The series can be used in applications characterized by the presence of explosive atmosphere.
For this reason the probes are designed and manufactured according to the ATEX 94/9/CE

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Safety Note

Back to pressure sensors index...

 

XPSA Pressure transmitters for applications in hazardous areas
• Ranges:
from 0...50 bar to 0...1000 bar (from 0...750psi to 0...15000psi)
• Accuracy: 0.15% FSO
• Current output signal
• Protection rating: IP65 / IP67
• Wetted parts: 17-4 PH
• ATEX EEx ia IIC T5 e T6 Certification
• Accessories: TDP
  Ask for more Information

Profile

The XPSA transducers are based on the extensimetric measurement principle.
The mechanical structure makes the transducer insensitive during the tightening phase.
This transducer is suitable for all applications which require robustness as well as high accuracy.
The series can be used in applications characterized by the presence of an explosive atmosphere.
For this reason the probes are designed and manufactured according to the ATEX 94/9/CE directive with protection measures in compliance with: EN50014/EN60079-0/EN50020/EN50280.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Safety Note

Back to pressure sensors index...

 

TPS Pressure transducers
• Ranges: from 0...10 bar to 0...1000 bar
(from 0...150psi to 0...15000psi)
• Accuracy: ± 0.15% FSO typical
• Protection rating: IP65/IP67
• Wetted parts 17-4PH
• Temperature range -40...+120°C
  Ask for more Information

Profile

Series TPS transducers are based on the extensimetric measurement principle with strain gauges on metal base.
An innovative mechanical structure makes the transducer completely insensitive to tightening during installation.
This transducer is suitable for all those applications where in addition to ruggedness and reliability high accuracy is required.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation

Back to pressure sensors index...

 

TDP Plug-in display for transmitters
• Universal mounting on Transducers with 4-20 mA Output; Plug DIN43650
• No additional Power Supply required
• Easy to programming using Push Buttons
• Compact Sandwich construction
• Good Readability through LED-Display
• Alarm: Open-Collector-Output
  Ask for more Information

Profile

The model TDP plug-in display is a universal local display suitable for use with various transmitters. The transmitter must be fitted with an analogue output and a connector in accordance with DIN43650. Type TDP2000 can be delivered for use in hazardous areas. The plug-in display is simply plugged in between connector and socket; it is then ready for operation. The plug-in display is user programmable.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation
Operating Manual

Back to pressure sensors index...

 

TKDA Digital auto zero and span options
• Course Magnetic Autozero
• Fine Magnetic Autozero
• Calibration Signal 80% FS
• Magnetic Autospan
• Partial reset function
• Total reset function
  Ask for more Information

Profile

Digital “Autozero & Span” option makes the pressure transmitter TK Series a product extremely innovative and versatile. Designed thanks to the advanced electronics used by TK, this function allows zero and span adjustment in a simple, fast and reliable way, avoiding to use analogue trimmer, potential weak point and source of possible drifts or failures. The starting is user friendly, simply touching the specific target marked on the sensor body with a pen with magnetic head (included as standard). Within few seconds the operation is concluded, without the need to dismantle or to open the instrument.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation
Operating Manual
 

Back to pressure sensors index...

 

TPSADA pressure transducer with digital autozero and span option
• Coarse Magnetic Autozero
• Fine Magnetic Autozero
• Calibration Signal 80% FS
• Magnetic Autospan
• Partial reset function
• Total reset function
  Ask for more Information

Profile

Digital “Autozero & Span” option makes the pressure transmitter TPSA Series a product extremely innovative and versatile. Designed thanks to the advanced electronics used by TPSA, this function allows zero and span adjustment in a simple, fast and reliable way, avoiding to use analogue trimmer, potential weak point and source of possible drifts or failures. The starting is user friendly, simply touching the specific target marked on the sensor body with a pen with magnetic head (included as standard). Within few seconds the operation is concluded, without the need to dismantle or to open the instrument.

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation
Operating Manual
 

Back to pressure sensors index...

 

TPFADA pressure transducer with digital autozero and span option
• Ranges: from 0...10 to 0...1000 bar
• Output signal 4...20mA 2-wires / 0.1...5.1Vdc /
0.1...10.1Vdc / 0...5Vdc / 0...10Vdc / 1...5Vdc /
1...6Vdc / 1...10Vdc
• Protection rating: IP65/IP67
• Wetted parts: 17-4PH Stainless Steel
• Flush fitting stainless steel measuring diaphragm
• Digital Autozero & Span function
  Ask for more Information

Profile

TPFADA Series flush diaphragm pressure transmitters are based on bonded strain gauge on stainless steel technology. Thanks to the strong flush diaphragm made with 17-4 PH stainless steel, TPFADA is particularly suitable for pressure measurement where the media is with high viscosity (thick fluids, oils, rubber, pulps, chemical products, etc.) and the traditional transducers with internal measuring chamber cannot be used. The high thickness of the diaphragm makes the product very reliable and suitable for heavy industrial application. Internal state of the art electronics allows a wide range of current and voltage signal outputs, as well as the innovative “Digital Auto-zero & Span” function is able to perform an easy and quick automatic zero adjustment after the installation, simply with the touch of a magnetic pen, supplied as standard

Download our documentation
Choose language
Datasheet
General Brochure Pressure Transducers and Transmitters
Manual of Electrical Installation
Operating Manual
 

Back to pressure sensors index...

[TOP]